Irrigation pump selection plays an important role in meeting your irrigation needs in Australia. The right pump for irrigation ensures that you meet the water requirements for your crops and provide efficiency to get the most out of your field’s layout. Consider the following tips when choosing the right pump for irrigation.
Understanding the basics
There are several types of techniques used for irrigation but the goal is typically the same – pumping water from the source to the field. The main aim is to keep your energy requirements low and ensure that all your plants get an adequate amount of water. Plants don’t need too high and too low amounts of water. You can use modern irrigation techniques to meet your goals and get the right pump. To ensure you are irrigating your fields uniformly, you should divide the entire cultivable area into smaller zones. You can segregate the zones based on the crops cultivated, type of soil, and irrigation requirements. Each zone is irrigated with the help of tubes, pipes, valves, and sprinklers which can be connected to the pump.
The main reason for dividing the field into zones is because a single sprinkler does not have the required flow and pressure to irrigate the whole area at a given time. Irrigation controllers are responsible for turning the sprinklers on and off in a particular zone.
Choose the right irrigation equipment
Different irrigation equipment requires different amounts of pressure and water. To avoid unnecessary irrigation pump repair in Australia, you should choose irrigation equipment before choosing your pump. When choosing your irrigation equipment, it is crucial to consider the controller. Controllers play an important role in turning on and off the water supply at certain periods such as during heavy winds, rains and direct sunlight. Controllers are responsible for conserving water as they turn off the pump to enable water to seep into the soil adequately. This reduces infiltration and water runoff. Smart pump controllers are getting very popular nowadays. They use a lot of data such as the weather, the humidity, rain, and moisture sensors to determine the requirements for your crops.
The type of water source
For your irrigation to be effective, you need adequate water access. Currently, there is a shortage of water in some regions of the world. This means that you need to ensure that you manage water efficiently in your field. Some of the sources of water you can use for irrigation include bore wells, springs, wells, lakes, rivers, and other non-conventional sources such as drainage water, reclaimed water, wastewater, desalinated water and more. When choosing a pump for irrigation, it is important to consider your source of water.
Determining the type of pump
When determining the type of irrigation pump you need in Australia, you should consider the location of the source of water. Deep-well submersible pumps and turbine pumps are suitable for drawing water from wells, and other underground sources. You can use different types of pumps such as submersible pumps when it comes to surface water. Submersible pumps reduce the chances of theft because the pump is not visible and doesn’t produce a lot of noise.
